●工业回转盘，可承受偏载。
●可旋转360°，带有摩擦功能。
●中心孔可通线。

・手动操作的圆形伸缩杆。
・可以在任何位置锁定，无论是伸长状态还是压缩状态。
・具有助力功能，利用螺旋弹簧来实现轻便的提升操作。
•The assist power is approximately 10kgf.

—Protects the edge of glass doors.
—Designed to be installed on the hinge side of doors.
—Seals the gap between glass doors and fixed glass.
—No tools are required for installation.

—Protects the edge of fixed glass.
—Seals the gap between fixed glass and glass doors.
—No tools are required for installation.

—Protects the edge of glass doors.
—Designed to be installed on the trailing edge of sliding doors.
—No tools are required for installation.

—Protects the edge of glass doors.
—Seals the gap between glass doors and fixed glass which are positioned at 90° or 180°. The built-in magnet provides tighter sealing against water.
—No tools are required for installation.

—Protects the edge of glass doors.
—The built-in magnet provides tighter sealing against water.
—No tools are required for installation.

—Protects the edge of glass doors.
—The shape of the edge of the seal is designed to absorb the shock of closing doors.
—Seals the gap between sliding doors. The built-in magnet provides tighter sealing against water.
—No tools are required for installation.
—Suitable for glass sliding doors that open in opposite directions.

—Protects the edge of glass doors.
—Designed to be installed on the bottom of doors and seal the floor gap.
—Groove helps drain water droplets on outward opening shower
doors to prevent them from dripping on the bathroom floor.
—Must use with the end parts set (drainage port and cap / sold separately).
—No tools are required for installation.

—Reduces the space between edge seals and frames (leading edge).
—Please attach the spacer to glass doors before installing edge seals.

●通过操作简单的按钮，即可进行角度调节及锁定。
　适用于需要进行角度调节的管接头。
●按下按钮，即解除锁定，铰链角度可在10°～180°之间调节（每档10°）。
●角度调节后松开按钮，即可牢靠锁定。

●Designed for mounting on transparent glass to improve visibility and safety.
●Easily mountable on glass with double-side tape.
●Sleek satin finish.
●Two design options available.

●将顶板等板材安装在搁板的安装孔后使用。
●带橡胶底脚，不固定在工作台上也可使用。
●也可定制高承重型（承重350 kgf、外径φ750 mm）。

●手动圆棒型伸缩棒。
●伸长方向、压缩方向均可锁定在任意位置。

●利用棘轮机构，可按每档4 mm固定高度。●超过最上一级时，棘轮机构解锁。●无需缩回到最下一级，即可再次伸出。